Stuart-turner RG4000 Manual do Utilizador

Peripheral PumpsOPERATING INSTRUCTIONS Please leave this instruction booklet with the pump as it contains maintenance and safety information(Original

- 10 -Cable Gland & Supply Cord Fitting Instructions (Single phase)RG3300, RG5000The cable gland assembly Fig. 10 (items 1 & 2) provides the n

- 11 -Cable Gland & Supply Cord Fitting Instructions (Single phase)RG5000 Dual VoltageThe cable gland assembly Fig. 13 (items 1 & 2) provides

- 12 -Wiring DiagramsThe supply cord and internal wiring within the terminal box are routed and secured to ensure compliance with the electrical stand

- 13 -NOISEThe equivalent continuous A-weighted sound pressure level from the pumpset does not exceed 70 dB(A) at a distance of one metre.COMMISSIONIN

- 14 -Cont ... b) Vertical suction models (flooded suction) These models are supplied with priming plugs fitted. Certain models are also

- 15 -Cont ...MAINTENANCEWARNINGS:  Care should be taken to protect the pump from frost and freezing.  Pump Location If possible site the pump

- 16 -Cont ...TROUBLE SHOOTING GUIDEENVIRONMENT PROTECTIONYour appliance contains valuable materials which can be recovered or recycled.At the end of

- 17 -Cont ...YOUR 1 YEAR GUARANTEEStuart Pumps are guaranteed by Stuart Turner Limited to be free from defects in materials or workmanship for the ap

- 18 -NOTES

- 19 -NOTES

- 2 -MODELSINDEX . . . . . . . . . . . . . . . . . Page NoApplication . . . . . . . . . . . . . . . . . . . . . . . . . . 2Product Description . . .

Stuart Turner Ltd, Henley-on-Thames, Oxfordshire RG9 2AD ENGLAND Tel: +44 (0) 1491 572655, Fax: +44 (0) 1491 573704email: pumps@stuart-turn

- 3 -Cont ...PRODUCT DESCRIPTIONMotor: Induction type, totally enclosed fan ventilated cooling*, continuously rated*, class ‘F’ insulation. Motors c

- 4 -Cont ...Stuart Turner reserve the right to amend the specification in line with its policy of continuous development of its products.Note: For i

- 5 -SITING OF THE PUMP/PIPEWORKWARNINGS:  Pump Location If possible site the pump in a location where in the unlikely event of a liquid leak,

- 6 -Cont ...The pump enclosure must be ventilated and there should be a minimum clearance of 80 mm between the pump and housing on all sides.To pre

- 7 -Cont ...The standard single phase pumps are suitable for a supply of 230V, 1 Phase, 50Hz. Other voltages and frequencies are available on certai

- 8 -Cont ...WiringThis product range must be permanently connected to fixed wiring and is provided with a set of terminals which allow the connection

- 9 -Cable Gland & Supply Cord Fitting Instructions (Single phase)RG4000, RG6000, ES4000, ES6000The cable gland assembly Fig. 7 (items 1 & 2)